MP-FGC |Mad Professor effect pedal Forest Green Compressor

EAN13 -52156 6430033091180
artigo: MP-FGC
identificação produto: 52156

effect pedal Forest Green Compressor
The Forest Green Compressor is fully tuneable for both bass and guitar to add compression or sustain to your sound.

There is extremely low noise throughout the range and a high overload margin, which allows also a wide dynamic input range at minimum distortion and noise. The tone knob allows you to fine-tune so that the compression can be very transparent and doesn't get in the way. When in sustain mode, you can achieve a very dynamic feel where you can get a touch-sensitive tone with longer sustain. The attack remains, making this pedal suitable for many styles of music and a very functional compressor.

The quality of the Forest Green Compressor is just like the other Mad Professor pedals in terms of quality and especially tone, dynamics and expression.


CONTROLS

LEVEL: In Compressor mode adjusts the overall volume and the FGC can be used even as a booster. In Sustain mode, the Level no longer adjusts total output but the level of the sustained part.

COMPR.: Sets the amount of compression and sustain. lower settings give mostly peak limiting, higher settings more compression and less touch sensitive response. at maximum the output will be heavily compressed, while still retaining clarity at almost infinite sustain. A good starting point for this control is a bit below center (ten o’clock) with most guitars.

TONE: Tone control on FGC is designed to fine-tune the compressed sound for most transparent tone and effect: adjust CCW for full range compression and set at noon for tighter sound with a little less bottom end and turn fully CW to slightly reduce upper treble.

COMPRESSOR/SUSTAIN SWITCH: Attack and decay times are carefully fine-tuned and internally set for swift attack and slow decay. Sustain/Compression switch set for Sustain the attack is preserved allowing dynamic touch and ease of playing as the FGC amplifies the decay and weaker parts. For standard compression set the mode switch to Compressor.


ELECTRICAL SPESIFICATIONS

Supply voltage range: 9 to 18VDC

Current consumption: 14mA at 9VDC

Input impedance: 1M Ohm’s

Output impedance: 20K Ohm’s

Max input: -10dBV

Hardwire true-bypass



« voltar atrás
^ Ask your question on whatsapp